ZBS RAPID (INDUSTRIAL) PAINT
Product Code :
CATEGORY : Floor Painting
Subcategory : ZBS EPOXY AND INDUSTRIAL PAINTS
Industrial Topcoat is a single component, alkyd resin based glossy topcoat that can dry quickly.
It is an air drying synthetic alkyd resin based and lead free solvent based, glossy, covering, anticorrosive, economical, quick drying topcoat paint.
|FEATURES||Hydrocarbon resin supported, organic solvent, easy to apply, very fast drying, well spread ZBS rapid industrial top coat paint is environmentally friendly with lead-free properties. It does not harm human health after drying. It has lasting brightness. Provides decorative appearance on surfaces. It can be applied with brush and roller. It is especially recommended to apply by spraying. It does not flow. It is highly resistant to corrosion and sunlight. It can be used safely in iron and steel, wrought iron, machinery, agricultural tools, all kinds of decorative metals, concrete, gross concrete, plaster, betopan, OSB, MDF surfaces.|
|APPLICATION||Surfaces should be cleaned from oil, dirt, rust and swollen paint residues. Apply between + 5 ° C and + 40 ° C by brush, roller or spraying. Old painted surfaces must be sanded. Rapid primer should be applied first and ZBS Rapid Paint should be used as topcoat. Clean the tools you use with ZBS rapid or cellulosic thinner immediately after application.|
10 - 15% with brush and roller, 20 - 40% with spray ZBS rapid or cellulosic thinner.
DRYING TIME (20 ºC, 65% HUMIDITY)
Touch Drying: 15 - 30 minutes, Hard Drying: 3 hours, Full Drying: 24 hours
Depending on the type and absorbency of the surface to be applied, it can be painted with 10-15 kg area in 1 coat with 1 kg.
(25 micron dry thickness) Controlled sample work should be performed for precise consumption.
|STORAGE||For 5 years in its original package in a cool, dry, sun-free and moisture-free environment.|
S 2: Keep away from children.
S 3/7/9: Keep in a cool, well-ventilated place.
S 13: Keep away from food and drink.
S 16: Do not smoke while working, keep away from areas to be ignited.
S 23: Do not breathe vapor.
S 24/25: Avoid contact with eyes and skin.
S 46: If swallowed or drink, seek medical advice immediately.
S 51: Work in a well-ventilated area.
Complies with TS 39.